(314)754-6358 or(843)278-0342
Fax: 843-329-1333
 

Weight Conversion Utility
  Terms & Definitions

Featured Item:

Cambridge 670-P1

*CSW-10 Indicator Included*

$2375.00

Cambridge 680-P1 & 680-P2 Series

Portable Utility Scale with CSW-10 indicator

Our 680 Series are built for incredible durability and easy transport. Easy lift wheel jacks make going from transport mode to weighing mode quick and simple. The super strong ramp/s is built with the same 3/16” thick steel as the weighing platform and folds back with ease to allow transport through most typical halls and doorways. The 4" cast iron wheels roll with ease on even the most irregular factory or laboratory floor.

680-P1
  
680-P2
 

MODEL 680-P1 & 680-P2 STANDARD FEATURES
• (680-P1) One 12", folding, easy incline, front loading ramp.
• (4) Internally mounted, Environmentally protected, NTEP certified-5000 Division, Class III/IIIL,
IP 67 water resistant rated load cells.
• Column mounted NEMA 4X junction box for convenient corner adjustments.
• Structural tubular steel construction.
• Anti-skid diamond plate deck with eye bolt holes.
• 150% Overload protection
• 100% end loading capacity.
• Shielded load cell cables and 10 foot indicator cable.
• Ultra-low profile (1.5" above the floor).
• 1 part in 5000 accuracy.
• (2) 4" straight cast iron wheels with roller bearings and grease fittings (front).
• (2) 4" swiveling cast iron wheels with roller bearings and grease fittings (rear).
• Wheel jacks to lift and lower scale.
• 40" high indicator column with mounting plate.
• OSHA orange safety handle grips.

 

   MODEL 680-P1 & 680-P2 STANDARD FEATURES
• (680-P2) Two 12", folding, easy incline, side loading ramps.
• (4) Internally mounted, Environmentally protected, NTEP certified-5000 Division, Class III/IIIL,
IP 67 water resistant rated load cells.
• Column mounted NEMA 4X junction box for convenient corner adjustments.
• Structural tubular steel construction.
• Anti-skid diamond plate deck with eye bolt holes.
• 150% Overload protection
• 100% end loading capacity.
• Shielded load cell cables and 10 foot indicator cable.
• Ultra-low profile (1.5" above the floor).
• 1 part in 5000 accuracy.
• (2) 4" straight cast iron wheels with roller bearings and grease fittings (front).
• (2) 4" swiveling cast iron wheels with roller bearings and grease fittings (rear).
• Wheel jacks to lift and lower scale.
• 40" high indicator column with mounting plate.
• OSHA orange safety handle grips.
     
Platform Size
Capacity
Price
Platform Size
Capacity
Price
30" x 30" 1000 lb x 0.2 lb $3720   30" x 30" 1000 lb x 0.2 lb $3920
30" x 30" 2500 lb x 0.5 lb $3720   30" x 30" 2500 lb x 0.5 lb $3920
36" x 36" 1000 lb x 0.2 lb $3920   36" x 36" 1000 lb x 0.2 lb $4120
36" x 36" 2500 lb x 0.5 lb $3920   36" x 36" 2500 lb x 0.5 lb $4120

Options:

Description
680-P1
680-P2

Smooth Carbon Steel Deck Plate

N/C

N/C

Locking Wheel Brakes
$115
$115

"FM" Approved Stainless Steel NEMA 4X Junction Box
$290
$290

"FM" Approved Loadcells
$170
$170

Stainless Steel Loadcells, Leveling Feet, and Hardware
$335
$335

Hermetically Sealed Stainless Steel Loadcells, SS Leveling Feet, and SS Hardware

$660

$660

   

CSW-10 Indicator (included)

Battery Powered add $180

  

CSW-10-SS Stainless Steel Indicator - Add $250

Battery Powered add $180

  

CSW-15 Remote Control Indicator - Add $670

Battery Powered add $180
  • Selectable NTEP 5,000 Division Non-NTEP 20,000 Division
  • Net/Gross Display Modes
  • Full Range Auto Tare
  • Adjustable Digital Filtering
  • All Pushbutton Controls
  • LED Display (Bright)
  • Printer Data Output on Demand
  • 9 Pin Load Cell Connection
  • Simple No-Soldering Load Cell Connection
  • Clearly, Visible Center of Zero Indication on Display
  • Lb/Kg Conversion
  • 1 to 5 Points of Digital Calibration Available
  • Full Range Push Button Zero
  • (1) RS-232 Port for Interface with: Printer, Computer, Scoreboard, Remote Receiver (RF Link)
  • AC Adapter Provided
  • Auto Zero Tracking
  • Adjustable Motion Detection
  • Plastic Dust-Tight Enclosure with Stainless Steel Swivel Stand.
  
  • Stainless Steel NEMA 4X Enclosure
  • Selectable NTEP 5,000 Division Non-NTEP 20,000 Division
  • Net/Gross Display Modes
  • Full Range Auto Tare
  • Adjustable Digital Filtering
  • All Pushbutton Controls
  • LED Display (Bright)
  • Printer Data Output on Demand
  • 9 Pin Load Cell Connection
  • Simple No-Soldering Load Cell Connection
  • Clearly, Visible Center of Zero Indication on Display
  • Lb/Kg Conversion
  • 1 to 5 Points of Digital Calibration Available
  • Full Range Push Button Zero
  • (1) RS-232 Port for Interface with: Printer, Computer, Scoreboard, Remote Receiver (RF Link)
  • AC Adapter Provided
  • Auto Zero Tracking
  • Adjustable Motion Detection
  

     

  • Wireless Remote Control
  • 1 1/2" Red LED Display
  • Selectable NTEP 5,000 Division Non-NTEP 20,000 Division
  • Net/Gross Display Modes
  • Full Range Auto Tare
  • Adjustable Digital Filtering
  • All Pushbutton Controls
  • LED Display (Bright)
  • Printer Data Output on Demand
  • 9 Pin Load Cell Connection
  • Simple No-Soldering Load Cell Connection
  • Clearly, Visible Center of Zero Indication on Display
  • Lb/Kg Conversion
  • 1 to 5 Points of Digital Calibration Available
  • Full Range Push Button Zero
  • (1) RS-232 Port for Interface with: Printer, Computer, Scoreboard, Remote Receiver (RF Link)
  • AC Adapter Provided
  • Auto Zero Tracking
  • Adjustable Motion Detection
  • Plastic Dust-Tight Enclosure with Stainless Steel Swivel Stand.

 

E-mail us at:
sales@icscale.com

I.C.S. Inc. 2320 Airpark Drive, Charleston, SC 29406 Ph: 314-754-6358

ALL MAJOR CREDIT CARDS ACCEPTED